• MXA PRODUCT SPOTLIGHT: SUPERLITE TITANIUM T-HANDLES

The Superlite titanium kit has 6mm, 8mm, 10mm, 12mm, 13mm and 14mm T-handle wrenches to cover all the bases on Japanese and Austrian brands. The 6mm and 13mm T-handles are required for European bikes. Every decent mechanic already has a set of T-handles, but factory mechanics want the $400 Superlite Titanium T-handles for two reasons: (1) They’re lighter, thus easier to carry in a tool bag with spare goggles, a water bottle, pit board and other miscellaneous parts mechanics carry to and from the track, and (2) they’ve got the factory style that matches the titanium axles and bolts on their bikes.

Retail price: $400.00 at [email protected] or www.docwob.com

• MXA PRODUCTS SPOTLIGHT: FACTORY EFFEX V1 MOTORCYCLE STAND

“Factory Effex’s V1 stand uses quality carbon steel construction and features an exclusive rubber top traction pad with countersunk rivets to prevent frame or skid plate scratching. The OEM motorcycle branded graphics use scratch-resistant, 12-mil, laminated vinyl and can be customized with your sponsors, name, and number. For the bikes that sit unbalanced, we offer an auxiliary wedge that can be installed to level the bike with both tires off the ground.” —Factory Effex’s Chris Stangl. Retail price: $99.95 V1 Stand, $14.95 (wedge) at www.factoryeffex.com or (800) 866-0709.

• MXA PRODUCT SPOTLIGHT: FASTWAY PRO MOTO BILLET AIR-EXT FOOTPEGS

“The Fastway Air-Ext (Ankle-Savers) footpegs are the pinnacle of American-made control, comfort and performance at your feet. The patented Fit Kit system allows standard and low-position options for taller riders, while the adjustable camber allows you to tilt the peg for reduced leg fatigue. Also, the adjustable footbed allows for the ultimate feel from the soles of your boots.” The retail price is $299.94 at www.fastway.zone or (208) 466-4762.

• MXA PRODUCT SPOTLIGHT: SIDI CROSSFIRE 3 SRS BOOTS

The all-new Sidi Crossfire 3 SRS motocross boot uses high-tech details to address specific needs expressed by riders. Starting with the Hyper Extension Block, which is crucial for safeguarding the rider’s ankle and tendons, and continuing with the Flex System, which acts on the flexibility of the boot. The Adjustable Calf System regulates the opening of the boot, allowing the cuff to be widened or narrowed by means of simple adjustments to guarantee an absolutely comfortable fit.

A replaceable boot guard plate, made of PU with a molded rubber insert, is responsible for protecting the rider’sleg from the heat of the engine. It is inserted inside the boot cuff and helps to extend the life of the boot by limiting wear. Finally, the removable and replaceable Dovetail sole has been chosen to complete the boot and it is also available in an enduro version. This component is made with the aim of ensuring maximum safety and comfort while guaranteeing perfect grip on both the bike and the ground. The retail price is $599.99 at www.motonation.com.

• MXA PRODUCT SPOTLIGHT: YAMAHA GENUINE RADIATOR FAN KIT

The Yamaha Genuine  kit is a unique and cost-conscious accessory that integrates seamlessly with 2020–2022 YZ250FX and 2019-2022 YZ450FX models. For $82.99, the GYTR radiator fan offers a plug-and- play improvement to your bike’s cooling capability, especially in muddy or extreme riding conditions. The YZ250FX and YZ450FX ECUs have been pre-programmed from the factory to power the radiator fan when the engine temperatures reach greater than optimal levels. The retail price is $82.99 at www.shopyamaha.com or (800) 962-7926. 

• MXA PRODUCT SPOTLIGHT: SCOTT PROSPECT AMPLIFIER GOGGLES

The new Scott Prospect Amplifier goggles not only defend, but also enhance your vision when riding. These lenses are injection-molded to provide improved definition and optical clarity, allowing you to see contours and transitions in the dirt like never before. With other perfected features such as the NoSweat face foam, a maximum field of vision, the innovative Scott lens-lock system, articulating outriggers and much more, these goggles have been engineered to “Defend Your Vision” no matter how extreme the conditions get. Retail price: $124.00 at www.scott-sports.com or (800) 893-5294.

• MXA PRODUCT SPOTLIGHT: ASTERISK CARBON CELL 1 KNEE BRACE

“Asterisk Knee Brace is proud to announce the all-new Carbon Cell 1 (CC1). Our dedication to making the finest quality, fitting and performing knee braces in the world has led us to the design and development of the CC1. The CC1 is manufactured from military-spec and aerospace-grade carbon fiber pre-preg that is made in America. We wanted a brace that fit so well on your leg, it looks like it’s painted on, and we hit a home run! At roughly 1 pound per brace, we believe it’s the lightest, best-fitting and most comfortable, functional knee brace in the world without sacrificing strength and durability. The CC1 is backed up by a three-year frame warranty and sells for $799.” Retail price: $799.00 at www.asterisk.com or (951) 268-6790.

• MXA PRODUCT SPOTLIGHT: ARAI VX-PRO4 RESOLUTE HELMET

Arai’s striking new Resolute graphic is now available in red or yellow and continues to deliver all the comfort and protection you’ve come to expect from Arai. Just as in every Arai helmet, the basic and simple organic shell shape is based on the R75 shape concept. The absence of exaggerated edges or protrusions on the shell should not be mistaken for a lack of imagination. It’s a visual demonstration of our commitment to your safety, by maintaining the integrity of the shell with real-world impact performance. Retail price: $739.95 at www.araiamericas.com or (610) 366-7220.

• MXA PRODUCT SPOTLIGHT: ODI/MOTION PRO DIRTCONTROL II GRIPS

The New Motion Pro DirtControl II Grips were designed by Motion Pro and are manufactured by ODI In California. Made with ODI’s V2 Lock-On System, the New DirtControl V2 Lock-On Grips will come complete with 6 Snap-Cams to fit most modern full-size Motocross Bikes. ODI Throttle Cams A, B, C, D, J & M.

Constructed of a durable Medium Density Compound New Web Pattern provides an ergonomic feel with excellent finger-tip traction Reverse Knurling delivers amazing traction to feel secure in wet or dry conditions. Available in Black or Grey. Retail price is $25.99 at www.motionpro.com.

• MXA PRODUCT SPOTLIGHT: WISECO RACER ELITE CONNECTING ROD

An OEM rod is a good part, but it’s also built specifically for what the stock horsepower output and rpm range are. The new Wiseco Racer Elite connecting rods are taking a step up in allowable performance, offering higher strength and quality, which are necessary to push the limits of what the engine can do in terms of horsepower and rpm. Racer Elite connecting rods are precision CNC-machined and held to tolerances as tight as one ten-thousandth of an inch in certain areas and also feature a rolled-in bronze bushing in the small end, oiling slots and passages in both ends, and carefully tested surface finishes. Retail price: $356.95–$415.95 at www.wiseco.com or (440) 951-6600.

• MXA PRODUCT SPOTLIGHT: UNI TWO-STAGE FOAM AIR FILTER

“For over 50 years, Uni Filters have been unsurpassed in engine protection and performance. The unique, two-stage filter design allows your engine to produce more horsepower and torque than any other air filter. Uni Filter is the choice of the greatest off-road racers of all time because of the Uni Filter’s ability to hold large amounts of dirt and still provide excellent air flow.” —Uni Filter’s Tom Gross. Retail price: $32.95at www.unifilter.com or (714) 535-6933.

• MXA PRODUCT SPOTLIGHT: NIHILO CONCEPTS FACTORY FRAME GRIP

“Nihilo Factory frame grip tape is a must-have for the serious rider. Not only does it stick to your frame like no other, it protects your motorcycle’s frame from wear, and its traction-tape finish allows the rider to grip the sides of the bike in perfect riding form. Ranging from $15.99 to $18.99 in price, our grip tape is custom cut and perfectly conforms to each frame.” —Nihilo’s Chris Downey at www.nihiloconcepts.com or (855) 464-4456.

• MXA PRODUCT SPOTLIGHT: ALPINESTARS TECH 7 BOOTS

“At Alpinestars, all our products are created for the demanding environment of racing. The Alpinestars Tech 7 boot is a light, anatomically profiled performance race boot. This CE-certified boot promotes core stability and flex via a bio-mechanical pivot while offering excellent ankle protection for just $389.95.” Alpinestars Heath Coffin at www.alpinestars.com or (800) 438-2577.

• MXA PRODUCT SPOTLIGHT: RINALDI RW 45 SCOOP TIRE

Rinaldi’s RW 45 rear soft-terrain tire is the perfect choice for muddy or sandy tracks. With a paddle/scoop- style tread, this tire will offer superior traction in soft-terrain conditions when compared to a conventional knobby tire that’s made for both intermediate- and hard-terrain conditions. If you ever ride on sandy or muddy tracks, this tire will help you pull away from the competition every time you turn the throttle. Retail price: $64.00 (100/90-19), $71.00 (110/90-19) at www.motomandistributing.com or (760) 949-0941.

• MXA PRODUCT SPOTLIGHT: FIRE POWER FEATHERWEIGHT LITHIUM BATTERY

“The Fire Power lithium battery is the most tried and true lithium battery on the market today. We have the most fitments available for a better fit and excellent cranking power so you don’t have to worry when starting your motorcycle. We also stand behind our products better than any other brands while saving our consumers a ton of money over the OE lithium units.” —Kirk Alves. Retail price: $96.95 to $397.95 at www.firepowerparts.com or (208) 376-8400.

• MXA PRODUCT SPOTLIGHT: TWIN AIR FILTER CLEANING SYSTEM

“The Twin Air cleaning system comes with a cleaning bucket, dirt remover, oiling tub, Liquid Power filter oil and contact cleaner. Pour the dirt remover into the cleaning bucket and you have a season’s worth of clean filters. The dirt and oil from your filter will settle to the bottom under the included wire rack. Washing the filter with soapy water afterwards is recommended. To re-oil, pour Liquid Power filter oil into the tub and fully submerge the filter in the oil. Squeeze the excess oil out into the tub for use another time (and use the contact cleaner to clean any oil residue).” —Twin Air’s Jeremy Garges. The retail price: $104.95 at www.twinairusa.com or (800) 749-2890.

MXA PRODUCT SPOTLIGHT: ROB ANDREWS “THE INSIDE LINE” HARDCOVER

The critically acclaimed book, “The Inside Line: Racing the 500cc World Motocross Championship” (Second Edition) is back on sale at www.insidelinebook.com. After receiving rave reviews from press and public alike, “The Inside Line” first press run sold out in three weeks. Now back in print “The Inside Line” offers a detailed, first-hand account of the life of a professional GP racer competing in the heydays of the 1980s. There are facts that will surprise you, anecdotes that will make you laugh, and brutally honest, never-before-published information.

Tracing the journey of the British former 500 GP star, from unremarkable amateur through to factory Kawasaki rider, GP contender, and member of Great Britain’s 1985 Motocross des Nations team, “The Inside Line” is a unique, comprehensive, and fascinating first-hand account of what it was really like to race in the 500cc World Motocross Championship during the 1980s. “Inside Line, litho printed on the finest silk art paper, is a mammoth, heavyweight, 416-page hardback book of uncompromising quality. It has over 400 photographs from the sport’s most acclaimed photographers. Available for world-wide shipping, the book can be ordered at www.theinsidelinebook.com

• MXA PRODUCT SPOTLIGHT: O’NEAL SPLIT CHEST PROTECTOR

The new, lightweight Split chest protector from O’Neal is made with injected plastic parts and bio-foam padding for optimum comfort. It has the perfect fit with multiple size adjustments on its shoulder pads and waist closure. The front and back pieces are detachable for multiple combination options, and it’s compatible with neck braces as well. Front and back meet EN 14021 certification. Designed with a slim design and for optimum ventilation, it can be worn under or over the jersey. The retail price: $99.99 at www.oneal.com or (805) 426-3300.

• MXA PRODUCTS SPOTLIGHT: POD ACTIVE K8 2.0 KNEE BRACE

“The all-new K8 2.0 forged carbon composite knee brace has a new impact guard design for better protection, a slimmer hinge housing, new damping inserts and improved synthetic ligaments. The new QuickLoc Clip system anchors the brace to your leg quicker. We’re so confident in the strength of our unbreakable K8 frame that it comes with an industry-leading, five-year warranty.” —POD Active’s Byron Marsh. Retail price: $799.95 (pair), $399.95 (single) at www.podactive.com or (208) 376-8400.

• MXA PRODUCT SPOTLIGHT: PRO-VUE PRESCRIPTION GOGGLES AVAILABLE IN 100% ACURI FRAMES

Pro-Vue has their prescription lens system available in the new 100% Accuri Gen 2 OTG goggle, and it is the best yet. Available in a half a dozen frame colors including this cool neon orange, and about a dozen different lens tints. Contact Pro-Vue at (507) 534-1247 or at www.pro-vue.com

• MXA PRODUCT SPOTLIGHT: THREE NEW PRO CIRCUIT HATS

Checked Globe Olive hat—$23.92
Hats are one of the best ways to show your affinity for something you love and with the holidays just around the corner, Pro Circuit has just dropped three new hats for you or the fan in your life. The notable Pro Circuit Globe is the focal point of two of the new designs, with the first being a well-liked Richardson Snapback. The Checkered Globe Hat in olive features a custom checkered globe patch stitched on the front and a mesh snapback in the back.

Pro Circuit Global black hat— $39.82

The two additional hats are New Era 9Fifty trucker-style snapbacks. The Globe Hat in black has the iconic logo embroidered on the front, while the back features the adjustable plastic snap closure for the perfect fit.

Pro Circuit Racing PCR hat—$41.75

The final hat enjoys all the top-notch features of the New Era 9Fifty hat, while showcasing the well-known Pro Circuit Racing (PCR) logo embroidered on the front. Any of these three hats bring the legacy of the Pro Circuit brand anywhere you go! To order go to www.procircuit.com.

• MXA PRODUCT SPOTLIGHT: MAXIMA RACING SUSPENSION CLEAN

“Maxima Racing’s professional strength cleaner is designed to clean suspension components internally and externally. Our proprietary formula combines industrial strength cleaners with a powerful spray to ensure maximum cleanliness while leaving a dry, residue-free surface. Suspension Clean is strong enough to eliminate tough-to-clean grime and debris but safe enough for incidental contact with Nitrile, Viton and most seal materials,” reports Maxima Racing’s Joe McKimmy. $9.99 at www.maximausa.com or (619) 449-5000.

• MXA PRODUCT SPOTLIGHT: FMF RACING YAMAHA YZ450F KICK PLATE

As seen on the Star Racing Yamaha YZ250 and YZ450 teams, FMF Racing has been making a unique FMF heat shield for the base of the Yamaha muffler to protect the rider from heat and to protect the muffler from wear damage when the extra plastic is trimmed off. Now, this trick little part is available for 2019-2022 model Yamaha YZ250Fs and YZ450Fs to boost the durability of your muffler and your riding gear. Retail price: $89.99 at www.fmfracing.com or (310) 631-4363.

• MXA PRODUCT SPOTLIGHT: NITROMOUSSE NITROWEDGE

The Nuetech Nitromousse system was created for motocross and off-road riders who prefer the no-flat guarantee of foam mousses over traditional tubes. The Nuetech Nitrowedge is simply an 8-inch section of Nitromousse that can be used to increase or “tune” the psi feel. It also can be used to increase the lifespan of a Nitromousse that has lots of hours on it. The Nitrowedge comes in all sizes for both the platinum 10–12-psi feel and plush 6–8-psi feel of the Nitromousse. Retail price: $19.95 at www.nitromousse.com or (608) 301-6764.

• MXA PRODUCT SPOTLIGHT: MAXIMA RACING DOT 4 BRAKE FLUID

Synthetic, zero-fade racing brake fluid is designed to ensure maximum stopping power and protection for critical brake-system components under the most extreme racing conditions. Extensively developed formulation maintains unparalleled responsiveness and performance by preventing water contamination and vaporization in any environment. Advanced chemistry resists oxidation under excessive tem- perature, prevents corrosion, and is compatible with SBR and EPDM rubbers. It also exceeds the requirements of U.S. FMVSS 116 DOT 3 & DOT 4, SAE J1703 and SAE J1704. Retail price: $16.95 at www.maximausa.com or (619) 449-5000.

• MXA PRODUCT SPOTLIGHT: ODI EMIG PRO V2 LOCK-ON GRIPS

We’re a big fan of having as much grip as possible when it comes to racing. Squeezing the bike with your legs, not sliding down a stock Honda seat cover, and most importantly, having a firm connection between the handlebars and the rider. It’s no secret that we’re also a fan of ODI, with how successful their Emig Pro V2 system is, who isn’t? The second generation of the Emig Pro Lock-On grips have improved ridges for your phalanges to grab onto as well as a reinforced end cap so when our clumsy photographer gets his grubby hands on one our test bikes, we’re not wondering why the sides of the grips are missing. Scroll down below to check out some of our favorite grips on the market. And if you’re wondering just how these grips are made, CLICK HERE as we toured ODI not too long ago. PRICE: $28.95

Here’s a really, really, reallyyyyy close look at a grip. 

“After 5 years of success with the original EMIG V2 Lock-On Grip System, the collaboration between ODI and Jeff Emig has taken the feel of motocross grips to the next level. Countless hours of design along with multiple test sessions with top riders, to develop a grip built specifically around a Pro’s needs that also provide maximum bike control to every level of rider. The New EMIG PRO Grip will be the choice of all motocross riders who want extra-soft compound for improved comfort, excellent control and less hand fatigue. Designed by Jeff Emig, developed and manufactured in-house at ODI Grips in Riverside, CA.” – ODI

• MXA PRODUCT SPOTLIGHT: FMF VISION ZO16 GOGGLES

The Zach Osborne Signature Edition takes the PowerBomb goggle and infuses Zach’s distinct design direction to create the exclusive ZO16 color combination. Incorporated into silicone patches on each side of the strap is the ‘ZO’ logo and signature, offering a subtle but powerful nod to the multi-time AMA Champion. Coupled with a unique translucent red and bright-yellow frame, the Zach Osborne signature edition is sure to stand out from the crowd. PRICE: $57.50

And if you’re interested in Zach Osborne’s future plans for his career, we just made a video detailing the rest of his 2022 season. CLICK HERE

Product Details: 

• Excusive Zach Osborne design & colorway
• Removeable nose guard deflects roost and debris
• Anti-fog coated polycarbonate lens for clear vision
• Triple layer moisture managing face foam soaks up sweat
• 45mm Ultra-wide silicon coated strap ensures a secure fit
• 9 retention points secure lens in frame
• All adult FMF goggles share the same lens and tear-offs
• Includes spare clear lens

• MXA PRODUCT SPOTLIGHT: PRO-BOOT MX” REMEDIAL BOOT REPAIR

Note the big tear in the toe box area of this brand-new boot.

Although you only think of Pro-Boot MX as a company that resoles well-used Motocross boots, they recently came upon a boot that had a bad luck story. Pro-Boot MX’s Randy Nagel got a brand-new Gaerne SG12 boot from a guy who ran his foot into something that split the metal toe cap in two and tore a hole through the side of the boot. Luckily, he didn’t get hurt. He sent the boot to Pro-Boot MX, not to have the brand-new soles replaced, but to see if they could do something about the big tear in the toe box.

After the repair, the boot is good to go.

Randy glued the inner padding back together, welded up the crack and color matched the area with a flexible bonding material. The Pro-Boot MX repair looked pretty good, especially for a new boot that looked like it’s effective lifespan was only one ride. Total cost including a new toe cap and the repair was under $50.00 (plus return shipping). So, if you have a run-in with a footpeg or your kickstarter gouges your boot, don’t throw it away, send it to www.pro-bootmx.com or call (507) 534-1247.

• MXA PRODUCT SPOTLIGHT: ENGINE ICE HI-PERFORMANCE COOLANT

“For more than 20 years motocrossers have relied on Engine Ice to cool and protect their machines to provide the best performance. Engine Ice Hi-Performance Coolant provides superior heat transfer to maximize horsepower output in all Powersport vehicles. Engine Ice is a propylene glycol-based antifreeze and coolant. The propylene glycol base, combined with the additive package, offers corrosion and wear protection, along with reverse osmosis water to produce a superior final product,” says Engine Ice’s Bryan Emrich. Retail price: $21.99 at www.engineice.com or your local dealer.

• MXA PRODUCT SPOTLIGHT: OGIO RIG 9800 PRO

• MXA PRODUCT SPOTLIGHT: PRO CIRCUIT HONDA CRF110F TOP CLAMP & BAR MOUNT

Pro Circuit is excited to release a new mini-moto part for 2013-2020 Honda CRF110F models. Designed to suit the taller rider, the Pro Circuit top clamp and bar mount helps create more legroom by raising the handlebars. It’s the perfect solution to prevent knees from smacking the bars, and it will also make your CRF110F’s front end longer. The clamp has full adjustability with different bar mount configurations, so you are able to personalize fitment as well. The clamp and bar mount are CNC-machined out of aluminum and then anodized red and blue for a factory look. These clamps are perfect for any mini moto rider looking to trick out their CRF110F.
The retail price is $298.00 at www.procircuit.com.

• MXA PRODUCT SPOTLIGHT:SUPERLITE TITANIUM T-HANDLE TOOL SET

The Superlite titanium kit has 6mm, 8mm, 10mm, 12mm, 13mm and 14mm T-handle wrenches to cover all the bases on Japanese and Austrian brands. The 6mm and 13mm T-handles are required for European bikes. Every decent mechanic already has a set of T-handles, but factory mechanics want the $400 Superlite Titanium T-handles for two reasons: (1) They’re lighter, thus easier to carry in a tool bag with spare goggles, a water bottle, pit board and other miscellaneous parts mechanics carry to and from the track, and (2) they’ve got the factory style that matches the titanium axles and bolts on their bikes.

The Superlite titanium T-handles aren’t only lightweight and cool-looking, they’re constructed using the highest-quality aerospace materials and welding procedures as well. Made from Grade 5 Ti6-4 (Ti6AL-4V) titanium alloy, they have CNC-machined tips and are welded together to aerospace specifications (AWS D17.1).

The 10mm Superlite T-handle weighs 133 grams (4.7 ounces), which is 183 grams (6.4 ounces) lighter than a Motion Pro chrome vanadium T-handle at 316 grams (11.1 ounces). The 13mm Superlite T-handle weighs 220 grams (7.8 ounces) compared to 334 grams (11.8 ounces) for a chrome vanadium version.

Currently, Superlite offers titanium bolt kits and titanium T-handles but is already working on custom aluminum T-handle holders; half kits with only 8mm, 10mm and 12mm T-handles for mechanics who only work with Japanese bikes; and stubby-version 8mm, 10mm, 12mm T-handles per request from factory mechanics who want to store smaller T-handles in their race-day backpacks that they take to the starting line.

If your bolts are on tight, the titanium T-handles will flex when trying to break it loose. Some picky mechanics didn’t like this, others didn’t mind the flex because they were enamored by the fact that they were using $400 T-handles.

The Superlite Titanium T-handles were made for factory mechanics looking to lighten their race-day backpacks and for the guy who likes to have the coolest setup in the pits. Superlite started by making titanium bolt kits in the UK, and now it’s breaking into the American market with factory Pro Circuit Kawasaki mechanic Olly Stone importing its products to the USA. Olly, who wrenches for Austin Forkner, was born and raised in England and came to the States to live his dream of being a factory mechanic. Retail price: $400.00— at [email protected] or www.docwob.com.

• MXA PRODUCT SPOTLIGHT: VINTCO VINTAGE MOTOCROSS PARTS—FOR 1970 THROUGH 1980 BIKES

VintCo specializes on vintage motorcycle parts. Originally they focused on making connecting rods for Ossa and Bultaco motorcycles. Now they have expanded into manufacturing rods, crankshafts, camshafts, bearing kits, cylinders and pistons for all modern dirt bikes. With over two decades of engineering and practical design experience in extremely high-horsepower modern engines, we are leveraging that expertise in manufacturing components for the vintage market. VintCo makes a wide range of new parts to replace the hard-to-find components you need to keep your vintage bike performing. For more information go to www.vintco.com or call (515) 210-9977.

1972-73 HODAKA WOMBAT, 1973 COMBAT WOMBAT & 1974 SUPER RAT CONNECTING ROD KIT

VintCo has all new heavy-duty Connecting Rod kits for your early 70’s Hodaka 125cc machines. These Connecting Rod kits will save you money over a new crankshaft. Their Connecting Rod kit fits 1972-73 Hodaka Wombats, 1973 Combat Wombats and 1974 Super Combats. VintCo rods kits are manufactured with heavy-duty forged steel and made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. Kit includes a rod, crank pin, big end bearing, wrist pin bearing, and two thrust washers. This newly manufactured connecting rod kit from VintCo will help you keep the ride going! Retail price: $159.95

1974-1978 HONDA CR125 PISTON KIT

This 1974-1978 Honda CR125 Piston kit includes rings, pin and clips. The piston is forged, made in Germany, Mos2 coated for break-in and available in standard and over-sizes. The wrist pin bearing sold is sold separately. Retail price: $119.95

1976-1980 YAMAHA YZ125 CLUTCH KIT

VintCo has all new clutch plate kits for your Vintage Yamaha. These Clutch kits will save you time and money as they come complete with steel and friction plates as well as the springs to complete the job. Our clutch cork friction plates are infused with aluminum particles designed to ensure smooth power delivery and fade-free performance. VintCo steel clutch plates won’t expand and do not fade like aluminum clutch plates. The clutch springs are heat treated for maximum life. This is an OEM-quality drop-in clutch plate kit that fits 1976 to 1980 Yamaha YZ125S. Retail price: $59.95.

• MXA PRODUCT SPOTLIGHT: KTM POWERPARTS ACCESSORIES

FACTORY TRIPLE CLAMPS
This orange anodized triple clamp includes the steering stem with the bottom bearing already pressed on. It features adjustable offset (20mm or 22mm) and a special split clamp design to optimize perfect grip on the fork tubes. Identical to the 2020-1/2 KTM FC450 Factory Edition triple clamps. Retail price—$623.99.

KTM 60-PIECE 3/8″ TOOL BOX KIT
The most commonly used Torx, Allen, socket, screwdriver blades, adaptors, ratchet, extensions and breaker bar in a form-fitting case. It is design to make working on almost every KTM nut or bolt from 50cc to 505cc. Retail price—$145.99.

KTM 300CC FACTORY ENGINE KIT
All the parts needed to turn your 250SX into a 300SX (including cylinder, gaskets, piston, rings, cylinder head, black box, wrist pin, circlips and power valve). It is a bolt-on engine kit that boosts  power by 4.25 horsepower more than the stock 250SX engine. Retail price—$956.99.

FACTORY WHEELS
The  orange anodized CNC-machined hubs are laced to D.I.D DirtStars rims with orange anodized aluminum spoke nipples with 36 black anodized spokes. The rear wheel comes in either 18-inch or 19-inch diameters on 2.15-inch DID DirtStar rims. Retail price—$424.99 (front), $499.99 (Rear). KTM Power Powerparts are available at your friendly local KTM dealer — to find a KTM dealer near you Click Here.

• MXA PRODUCT SPOTLIGHT: WORKS CONNECTION ELITE THROTTLE TUBE

“Works Connection’s Elite Throttle Tube has a CNC-machined throttle tube that rides on a sealed “ABEC 1 +” rated radial bearing and a polymer bushing for buttery-smooth action. Also included are six Delrin throttle cam pulleys engineered to match the OEM ratios and allow this product to fit most late-model motocross and off-road four-strokes.” —Works Connection’s Shawn Ralls. $69.95—www.worksconnection.com or (530) 642-9488.

• MXA PRODUCT SPOTLIGHT: ACERBIS POLYPROPYLENE KTM SKID PLATE

For years, the typical skid plate was made from aluminum. It was strong, light and durable. Then, carbon fiber came on the scene, and it was even lighter. Now, the newest generation of skid plates are made from polypropylene plastic. The benefits of plastic are that it can be color-matched, is flexible enough not to drastically stiffen a bike’s frame, and is less expensive.

MXA installed an Acerbis polypropylene skid plate on our 2021 KTM 450SXF because the MXA wrecking crew is hard on its bikes and has suffered engine case, water pump, ignition cover and lower-frame rail damage in the past. KTMs don’t come with skid plates on their motocross bikes, or even cross-country models. If you hit rocks, logs or other bikes, a skid plate can save your day and your wallet.

Thanks to a molded hook that engages the rear-frame cross-member, the Acerbis skid plate only requires one bolt to tighten the steel bracket that clamps the skid plate to the frame’s downtubes. Here is how we installed it: First, we slid the molded-in rear hook onto the rear frame cross-brace. Second, we put the one-bolt bracket on the frame (resting on KTM’s welded-on skid plate tabs). Third, we pushed the Acerbis skid plate up until the bolt hole lined up with the bracket’s threaded insert. Fourth, we installed the Allen bolt and spacer through the skid plate and tightened it down. It wasn’t as easy as we make it sound; just persevere.

After you ride your bike for the first time, be sure to double-check the fitment of the skid plate. The extreme loads placed on the frame can loosen up the skid plate. Once you tighten it down a second time, it should stay.

It’s no secret that an aluminum skid plate can increase frame rigidity—not a good thing. To combat this, it’s not uncommon for aluminum skid plates to come with rubber grommets around the bolts. With plastic skid plates, there is enough inherent flex in the material to eliminate this concern. Acerbis molded soft rubber segments inside the skid plate to cushion against wear on the frame rails. The polypropylene skid plate is very durable at 6mm thick. The skid plate is shaped to fit snugly against the contours of the engine, reducing space for mud collection. The price of polypropylene skid plates is half that of carbon fiber skid plates.

Our major complaint was with the 5mm Allen bolt that held the front of the skid plate. It got splattered with dirt, making it hard to get out. We would prefer an 8mm hex-head bolt to ease tightening and removal. Retail price: $82.95 (orange or black) at www.acerbisusa.com or (800) 659-1440.

• MXA PRODUCT SPOTLIGHT: MAXIMA RACING SUSPENSION CLEAN

“Maxima Racing’s professional strength cleaner is designed to clean suspension components internally and externally. Our proprietary formula combines industrial strength cleaners with a powerful spray to ensure maximum cleanliness while leaving a dry, residue-free surface. Suspension Clean is strong enough to eliminate tough-to-clean grime and debris but safe enough for incidental contact with Nitrile, Viton and most seal materials,” reports Maxima Racing’s Joe McKimmy. Retail price: $9.99—www.maximausa.com or (619) 449-5000.

• MXA PRODUCT SPOTLIGHT: BOLT HARDWARE BRAND-SPECIFIC BOLT KITS

Bolt offers a self-contained kit that stockpiles the most commonly used bolts for Honda, Yamaha, Suzuki, Kawasaki, Husqvarna and KTM offroad bikes (and vintage bikes). Each kit is specially designed to include special bolts for each brand. Every Bolt kit comes in an 18-compartment plastic box, which slips easily under the front seat of a truck. What can we say about the performance of a bolt kit. It works. Retail price: $54.95-$64.95 (Pro Packs), $19.95 (56-piece Track Packs) and $15.99 (bodywork only) at www.boltmotorcyclehardware.com

• MXA PRODUCT SPOTLIGHT: BRIDGESTONE BATTLECROSS X31

Developed using the latest Bridgestone technologies, the Battlecross X31 provides improved traction and grip on intermediate terrain. Additionally, the new X31 boasts increased stability and working range. Bridgestone’s Castle Block Technology, which acts on the shoulder blocks of the tires, through a convex section in the block, enhances the tractive power on both front and rear tires.

The Battlecross X31 has a new tread pattern that features an asymmetric block design on the rear tire, with a lower block ratio. The Battlecross X31 model will be available in six sizes and is expected to hit the shelves in early in 2022.

• MXA PRODUCT SPOTLIGHT: MUC-OFF’S PUNK POWDER MOTORCYCLE CLEANER BUNDLE

“Kick single-use plastic aside! We care for our planet as seriously as our motorcycles, so we created the ultimate cleaning bundle with the lowest possible impact on the environment. The Bottle for Life is a recyclable aluminum spray bottle that comes with a non-toxic, food-grade silicone base to protect the bottle so it will last longer, even if dropped, and will be more stable when placed on uneven ground.” —Muc-Off’s Amy Sparrow. Retail price is $34.99 (bundle pack), $19.99 (Punk Powder refill) at us.muc-off.com or your local dealer.

MXA PRODUCT SPOTLIGHT: FASST COMPANY KTM/HUSKY REAR BRAKE SPRING KIT

Fasst Company’s rear brake spring kit creates a more a tunable rear brake resistance and improved feel.

The pedal resistance can be adjusted by how much preload is placed on the spring. No more on-and-off. Eliminates broke OEM brake springs.

The return spring kit also minimizes debris from jamming the master cylinder.

Fasst’s rear brake pedal return spring kit consists of spring, spring bucket and nut. Retail price: $19.95 at www.fasstco.com

MXA PRODUCT SPOTLIGHT: MOTO TASSINARI VFORCE4R

The unique VForce reed valve features double the reed tip surface over a conventional reed valve design. The added reed petals mean that reeds only travel half the distance as a conventional reed valve to get the same airflow. The shorter opening means that they open quicker, close more completely and last longer. Ever since their introduction VForce reeds have been popular with two-stroke riders looking for more midrange, increased airflow and perfect fit. Constantly changing to improve the design, Motocross Tassinari offers the VForce4 with its pre-curved reed petal, carbon fiber petal tips, wider cage, 10.5% increase in reed tip area and longer reed stops. The VForce4 has become the go-to reed cage for many two-stroke owners. But wait, there’s more. Enter the “VForce4R” with its rubber over-molding on the reed petal tips to increase petal life, straighter intake manifold, newly design cage and a winged air guide that increases air velocity. For more info go to www.mototassinari.com

MXA PRODUCT SPOTLIGHT: PROTECH FULL-WRAP FORK GUARDS

The first time the MXA wrecking crew saw the British-made ProTech fork guards, we knew they were something every motocross racer needed. The ProTech guards offer 350 degrees of protection from roost for your bike’s fork legs. They vastly improve the chances of your fork seals lasting twice as long. The ProTech guards directly replace the standard OEM guards on KTMs, Husqvarnas, Hondas, Yamahas, Gas Gas bikes and Shercos.

Modern fork guards protect your fork legs from rock damage from the front but do nothing to keep the chrome from being damaged by dirt, debris and rocks ricocheting off the frame or roost thrown off the trailing edge of your own front tire. Just one stone chip to a chrome fork leg is enough to cause a fork seal leak. The first thing that most suspension specialists check before replacing a leaking fork seal is the condition of the chrome on the backside of the fork leg. Surprise! It is estimated that half of all fork seal leaks are caused by stone chips to the fork’s chrome legs. Sadly, no manufacturer cares about eliminating fork seal leaks caused by rocks.

Luckily, ProTech, a small British company, understood the problem and injection-molded wraparound fork guards that completely cover the fork tube, save for a small 1-inch opening up the back that allows the plastic guard to be flexed wide enough to pop over the fork leg. The small gap isn’t optimal, but the protection is much better than with stock fork guards.

The MXA wrecking crew races up to 10 bikes a weekend. That translates into a lot of blown fork seals, but none on the bikes equipped with ProTech wraparound fork guards. For 2020, ProTech has made a series of improvements to its fork guards. First, the grade of plastic was upgraded to the type used on automobile bumpers to eliminate any chance of roost cracking the plastic. The new plastic is more flexible and resilient. Second, the top of the fork guard has been redesigned to protect more of the fork’s stanchion (the large diameter aluminum tubes that the chrome fork legs slide into) from being peppered by roost. Third, on KTM, Husky, Sherco and Gas Gas guards, the tooling was changed so that the brake hose clamp could accept a speedo hose along with the front brake line. This was a big plus for off-road and enduro riders.

Retail price: $60.00—www.protechguards.co.uk or www.n2dirt.net. In the USA.ProTech does not have an American distributor, so ProTech fork guards have to be shipped from England (we have included the shipping charges in the price above). If you are in a rush, there is a good chance that you could order the ProTech guards from www.n2dirt.net in Southern CalIfornia.